Top Ten Video Editing Tips To Make Your Video Look Good

By | Blog, Tutorials | No Comments

While there are a million tips for video post production, we decided to consolidate 10 that would make the most difference. While these may not completely revolutionize your  videos, they will help remove the amateurish look that is so prevalent in videos today, stunting the viewing experience with bad editing.

1: Simple Is Better

There’s a time and a place for complex Motion Graphics. Rather than finding the most complex, crazy looking graphics and titles for your video, sometimes just a simple stationary title is better. If you find an effect that looks great, then by all means use it, however obnoxious graphics that try to make the video “cooler,” actually end up detracting from the video itself.

fcpx

Final Cut Pro X Example Project

2: Limit Fancy Transitions

Almost every video editing system is loaded with swirls, page wipes, exploding circles, spins and more. Please, please, refrain from using these habitually. They may fit the tone of the video once in a while, but repetitive use of them is just distracting and amateurish. Using cuts is more professional, less distracting and helps direct the viewer through the video. Fades are common, but make sure that you use them sparingly.

3: Keep The Best Quality You Can

We know you’re not always getting the best quality of video to work with, but it’s important that you make the most out of what you have. While it always depends on your purpose and format medium, try to keep the best quality as you can by compressing the absolute minimum. The lower the quality, the less enjoyable; you want people to be impressed with your video, not have to squint to see it.

4: Change Up The Camera Angle

While filming, it’s important to get as many shots as you can from a variety of angles. When editing the video, be sure to have a natural looking rotation of camera angles. Nothing looks worse than 30 different shots all from the same angle. Even if you only have two angles to choose from, try to mix them together (creatively) to add some variety.

fcpx-transition

Final Cut Pro Example Cut

5: Use Color Correction

A lot of amateur video makers completely ignore Color Correction. It has the ability to create a mood, to add a feel to your video that makes it unique and stand out. Make sure that this correction is completely uniform throughout all of your shots. Also, be sure to not “overdo it.”

6: Match It To The Music

Give the music and video some relationship, so it doesn’t look like you just slapped on a random song. Try putting cuts on beat drops and integrating unique characteristics of the song with certain types of clips. For instance, maybe a slow part to the song features some slow motion clips. It will be different in every case, but do your best to have the music compliment and add to what’s happening visually.

7: Remove Camera Noises (If You Have Any)

Absolutely nothing sounds more unprofessional than hearing clicks or other noises from the camera. Seriously. Remove that stuff, it’s annoying and something that easily fixed.

8: Mix It Up A Bit

Try making unique cuts and play with the length and arrangement of clips. It might not always work, but breaking patterns is a great way to captivate your audience.

9: Stop Shaky Video!

A little shake is completely fine, even desirable sometimes. However, if it’s too shaky, either try to fix it (stabilization) or trash it if it’s too much. Video that’s too shaky looks bad and can make some people seasick and is an instant turnoff.

10: Look Around For Inspiration

Lot’s of people have videos or producers they look up too. Look around in movies, commercials, Youtube videos and more for ideas. Maybe you saw a Youtube video with a cool sequencing of clips that you would like to try. Be creative, and <cliché the sky’s the limit!</cliché>

 

What it comes down to, is do what’s best for your video. You might even have to break some of these rules, but if you follow them, it will help make your video more like the pros. Feel free to leave a comment if you have any questions.

Motion Tutorial: Video “Slicing Effect” (Final Cut Effect)

By | Blog, Tutorials | No Comments

I decided to create this tutorial to show a cool looking effect for Motion. With lack of a better name, I called it “Slicing Effect,” where basically what’s happening is a drop zone is taken and made to look like lots of small “slices” are making it appear. It’s by no means a groundbreaking effect, but a fun one to know how to do. Here’s a video to show the final effect. This particular effect doesn’t look that great, but this Final Cut Effect is just a sample and has some incredible potential.

[embed_youtube src=”https://www.youtube.com/embed/OucpTBNepuQ” width=”700″ height=”394″ class=”youtube_styleme” id=”thisid”]
Song is “Friend” by “Blackmill.” Video Courtesy of Red Bull Content Pool: https://www.redbullcontentpool.com/content/international/products/web_clip_clean_bobby_brown

Step 1: Open A Motion Project and Create A New Drop Zone

Go to “Object” on the menu, then choose “New Drop Zone.”

Step 2: Create A Clone of the Drop Zone

Right click on the Drop Zone, and choose “Make Clone layer.”

Step 3: Create A Rectangle

It doesn’t have to be perfect, but make it about that shape and size. (Use the Rectangle Tool for this) This is the basis for what is to put into the Replicator to create the effect.

Step 4: Create A Replicator

Select the Rectangle we created, then click the “Create Replicator” button. (I’ve uploaded high-res images, so you can click and view the full image if you’re having trouble seeing). As for now, there’s 9 points in our Replicator, which has a size of 1276. Give your Replicator similar settings.

Step 5: Add Image Mask of Replicator To Drop Zone Clone

This is going to make our Replicator the source for the mask that we’re going to apply to our cloned Drop Zone.

Right click on the Clone Layer we just created, and choose Add Image Mask.

Then, change the Mask Source by dragging the Replicator we made into the Mask Source Box. This is making the Replicator the source of the mask for our Drop Zone. Above, you can see my Replicator in the Mask Source box.


At this point, your Canvas should look something like this. If it doesn’t, go back to Step 4 to make sure that your Replicator is set up correctly. Keep in mind that based on the random seed, your rectangles should appear at slightly different locations. I will attach the actual project file at the end that you can download and look at if you’re having trouble getting it to work.

Step 6: Create The Fly In

With the Replicator selected, I’ve created these keyframes. This will make the effect start large, filling the screen at the beginning, then shrinking down slightly. What we’re adjusting is the width and height of the bounds, which is basically the boundaries, inside of which all of our rectangles exist. So, the larger the bounds, the more spread out the rectangles will be, and the smaller the more packed together they will be. The keyframes above make the bounds go from big to small, creating a “fly-in” effect.

Step 7: Add a Gaussian Blur to the White Rectangle

Under Library, Filters, then Blurs, find the Gaussian blur and apply it to the white rectangle (not the replicator). Change the amount to 24.

Step 8: Randomize the Gaussian Blur

Add the “Randomize” parameter behavior to the amount of blur. Once you’ve applied the Randomize Blur, make it match the settings below. The animation window on the bottom right shows the variance in Blur. Make sure that you choose “Add and Subtract” under apply mode and change Amount to 11, Frequency to one or two, and turn Noisiness down. This will give the rectangles a natural looking blur.

Next, create a Keyframe on top of the “Randomness” to make it very blurry at the beginning when everything is flying in, then even it off. (Double click in the Animation Window to create a new keyframe) It should look like the image below.

Step 9: Create The Flyout

This is a continuation of Step 6. I have the original fly-in, the hold (the middle part) and the fly out (the last part where the width and height decrease). The orange and yellow are the width and height of the bounds of the Replicator, respectively. They represent the width and height of the area in which all of the rectangles reside.

Next, we have to change the size of the whole Replicator layer, its location and rotation as it flies out. Select your Replicator in the Layers Panel, then make the following adjustments. The light blue line (Size) decreases towards the end as the whole effect flies out, because it gets smaller. The X Position of the Replicator (Light Green Line) increases, because when it flies out, it moves slightly to the right. It also rotates (Pink Line) a little bit as it flies out.

Next, we have to move the drop zone along with the Replicator, so they can still see the Drop Zone as it’s moving out. In other words, we want our Drop Zones and our Replicators moving out together.

With the cloned drop zone selected, we’re basically mimicking what we did in the last photo, but this time we’re editing the Drop Zone. This way, the drop zone will move with Replicator as it moves out. Just like the Replicator, the X Location is Increasing (moving to the right), the Size is decreasing and it’s rotatingslightly.

Step 10: Duplicate

At this point, there aren’t quite enough rectangles to be able to see most of the Drop Zone. In order to be able to view more of the Drop Zone, I could simply increase the number of points in the first Replicator, which would add more rectangles, thus making the Drop Zone more visible. However, to make it look more organic, let’s duplicate the whole effect, then change some settings on the second one to make it slightly different. To do this, select both the cloned Drop Zone and the Replicator, and duplicate them. It helps to put them in a new folder to stay organized. (For example, in the folder”1st Part,” I could have the 1st Replicator and the 1st Drop zone. In the folder “2nd Part,” I could have the 2nd Replicator and the 2nd Drop Zone)

Here is what your Layers Panel could look like.

Below are the settings I chose for the duplicated Replicator. As you can see, I’ve changed a lot of the settings, such as the scale randomness, the scale and the number points. This will make it slightly different than the first one, which will help it fill in some of the gaps.

Step 11: Finishing Touches

We’re almost done! Let’s add a fade in and fade out:

Adding a fade in and out makes it look a little smoother. Add a FadeIn/Fade Out to your Cloned Drop Zones.

Let’s also change all of the keyframes we can to Bezier. It makes all of your animations less abrupt, and smoother looking. You can do it to whatever keyframes you like; just select the ones you want, right click, and under Interpolation, choose Bezier.

That’s it! If there’s something you missed or didn’t understand, feel free to ask us in the comments section below. Below is also a download link for the project file for you to take a look at. Feel free to use it as a Final Cut Effect or for whatever you want. I tried to simplify as much as possible for the tutorial, so there’s a few extra elements to look at, should you decide to download. Enjoy!

Download Motion Project